科学上网之centos7脚本
发布于 作者:苏南大叔 来源:程序如此灵动~ 我们相信:世界是美好的,你是我也是。平行空间的世界里面,不同版本的生活也在继续...
从前有名小科学家,他需要科学上网。他在github上面有一个貌似好用些的脚本,地址如下。据说就是必须设置个复杂的密码才能使用,不知道大家试用过没有?
安装脚本
需要的命令行脚本如下:
seosn.com:这里是【评论】可见内容
注意替换your_username
和your_password
,尽量不要使用特殊字符,比如感叹号
,会报错的。密码似乎会随机生成一个,所以写或者不写,都没有特别的问题。
脚本内容
貌似sh脚本如下,大家鉴定下看看。
#!/bin/bash
# Setup Simple PPTP VPN server for CentOS 7 on Host1plus
# Copyright (C) 2015-2016 Danyl Zhang <1475811550@qq.com> and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
printhelp() {
echo "
Usage: ./CentOS7-pptp-host1plus.sh [OPTION]
If you are using custom password , Make sure its more than 8 characters. Otherwise it will generate random password for you.
If you trying set password only. It will generate Default user with Random password.
example: ./CentOS7-pptp-host1plus.sh -u myusr -p mypass
Use without parameter [ ./CentOS7-pptp-host1plus.sh ] to use default username and Random password
-u, --username Enter the Username
-p, --password Enter the Password
"
}
while [ "$1" != "" ]; do
case "$1" in
-u | --username ) NAME=$2; shift 2 ;;
-p | --password ) PASS=$2; shift 2 ;;
-h | --help ) echo "$(printhelp)"; exit; shift; break ;;
esac
done
# Check if user is root
[ $(id -u) != "0" ] && { echo -e "\033[31mError: You must be root to run this script\033[0m"; exit 1; }
export PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
clear
yum -y update
yum -y install epel-release
yum -y install firewalld net-tools curl ppp pptpd
echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf
sysctl -p
#no liI10oO chars in password
LEN=$(echo ${#PASS})
if [ -z "$PASS" ] || [ $LEN -lt 8 ] || [ -z "$NAME"]
then
P1=`cat /dev/urandom | tr -cd abcdefghjkmnpqrstuvwxyzABCDEFGHJKLMNPQRSTUVWXYZ23456789 | head -c 3`
P2=`cat /dev/urandom | tr -cd abcdefghjkmnpqrstuvwxyzABCDEFGHJKLMNPQRSTUVWXYZ23456789 | head -c 3`
P3=`cat /dev/urandom | tr -cd abcdefghjkmnpqrstuvwxyzABCDEFGHJKLMNPQRSTUVWXYZ23456789 | head -c 3`
PASS="$P1-$P2-$P3"
fi
if [ -z "$NAME" ]
then
NAME="vpn"
fi
cat >> /etc/ppp/chap-secrets <<END
$NAME pptpd $PASS *
END
cat >/etc/pptpd.conf <<END
option /etc/ppp/options.pptpd
#logwtmp
localip 192.168.2.1
remoteip 192.168.2.10-100
END
cat >/etc/ppp/options.pptpd <<END
name pptpd
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
require-mppe-128
ms-dns 8.8.8.8
ms-dns 209.244.0.3
proxyarp
lock
nobsdcomp
novj
novjccomp
nologfd
END
ETH=`route | grep default | awk '{print $NF}'`
systemctl restart firewalld.service
systemctl enable firewalld.service
firewall-cmd --set-default-zone=public
firewall-cmd --add-interface=$ETH
firewall-cmd --add-port=22/tcp --permanent
firewall-cmd --add-port=1723/tcp --permanent
firewall-cmd --add-masquerade --permanent
firewall-cmd --permanent --direct --add-rule ipv4 filter INPUT 0 -i $ETH -p gre -j ACCEPT
firewall-cmd --reload
cat > /etc/ppp/ip-up.local << END
/sbin/ifconfig $1 mtu 1400
END
chmod +x /etc/ppp/ip-up.local
systemctl restart pptpd.service
systemctl enable pptpd.service
VPN_IP=`curl ipv4.icanhazip.com`
clear
echo -e "You can now connect to your VPN via your external IP \033[32m${VPN_IP}\033[0m"
echo -e "Username: \033[32m${NAME}\033[0m"
echo -e "Password: \033[32m${PASS}\033[0m"
注意事项
这款代码如果要正常使用的话,可能需要放行服务器的1723
端口。
如果本文对您有帮助,或者节约了您的时间,欢迎打赏瓶饮料,建立下友谊关系。
本博客不欢迎:各种镜像采集行为。请尊重原创文章内容,转载请保留作者链接。
本博客不欢迎:各种镜像采集行为。请尊重原创文章内容,转载请保留作者链接。